Perhaps the following scenario is one that you might find to be all too familiar; you have valuable household, storage, boating or business items that you need to protect from theft. So you carefully lock your doors upon leaving the premises and hope that an intruder won’t find their way into your property. In the back of your mind, you know that you will be away for a while and wonder how much of your personal property could be stolen and/or vandalized in the time that you’re gone.
Many people can identify with this unsettling situation and wonder how they can better protect their assets from damage and theft.
A great solution to this important issue is to install the Express GSM Wireless Motion Detector. This is the leading security device that allows you to “be there, even when you’re not.”
The battery powered Express GSM Wireless Motion Detector uses infrared sensors that can detect human movement. Once an intruder is identified by the sensor, the unit automatically launches a phone call and/or SMS text message to the owners mobile phone to alert them of the intrusion. Armed with this information, the owner can then contact the police to report the incident. This device can significantly shorten the time for law enforcement authorities to investigate the incident and make an arrest.
Because the unit is lithium battery powered, no AC power is required. The battery lasts for 6 months and is easily changed. With battery power, the Express GSM Wireless Motion Detector is the perfect motion detection solution to use where there is no AC power or there are limitations on installing permanent security devices. This makes it a great choice to monitor homes, businesses, retail stores, detached garages, sheds, car lots, temporary storage, building sites, warehouses and many other areas where valuables need to be monitored for potential theft.
The Express GSM Wireless Motion Detector uses these advanced technologies:
- GSM-communicator – This component uses a SIM-card that allows the unit to automatically launch a phone call or SMS text message to the owners mobile phone.
- Motion Detector – The infrared detector scans the area to pick up human movement.
- Radio Module – The built-in radio module is designed to communicate with the remote control unit to either arm or disarm the Express GSM.
- Remote Controller – The remote controller is used to either set or disarm the Express GSM unit.
Setting up the Express GSM Wireless Motion Detector can be done in just four steps:
- Insert the lithium battery.
- Insert the registered third party SIM-card.
- Call the Express GSM from the mobile phone. That will link the registered SIM-card to the mobile phone number so it will send phone and/or SMS text alerts to that mobile phone.
- The last step is to press a button on the remote controller to “synch” it with the Express GSM unit.
The Express GSM Wireless Motion Detector is ready to go to work with the standard settings. However, it can also be easily customized in the following ways:
- Set to send alerts to up to 6 different phone numbers and/or remotes.
- Choose to receive both a warning call and SMS text message or SMS only.
- Adjust the frequency of Express GSM status messages.
- Choose the time for the unit to return to protection mode after initiating an alarm message.
There is even a handy Express GSM APP is available for Android and Apple phones. With all of the benefits of such an alarm system, with none of the costs associate with a typical alarm system, it’s no wonder wireless GSM alarm systems have become so popular recently.
